Recommendations
            2017 - 07 - 28
            Clicks: 0
            Basic conceptsa. EMC, EMI and EMSElectromagnetic Compatibility (EMC) means the compatibility of products that are in the same electromagnetic environment (electric field and magnetic field). It has 2 ...
            2017 - 07 - 28
            Clicks: 0
            Magnetic circuitThis article tries to introduce PMDC motor’s magnetic circuit by the most acquainted concepts. It also tries to introduce some characteristics and parameters of the motors by means of ...
            2017 - 07 - 28
            Clicks: 0
            Basic conceptsMotor is an energy conversion device that converts electric energy into mechanical energy or mechanical energy into electric energy, using magnetic field as media.PMDC motor is an energy...
            Winding type and carbon brush placement principle

            Winding type and carbon brush placement principle
            Winding type and principle of carbon brush placement   Winding type and principle of carbon brush placement

            3-pole rotor/commutator winding graph (drawing 13)           5-pole rotor/commutator winding graph(drawing 14)
            a. Angel between slots of rotor and                                   a. Angle between slots of rotor and
               slots of commutator is 60°                                                slots of the commutator is 0°
            b. Coil C is in the process of commutating. It is being         b. Coil B is in the process of commutating. It is being
            shortcut by brush at negative terminal.                            shortcut by brush at positive terminal.
            c. Brush locates at the centre line of the magnetic poles.   c. Brush locates at the centre line of the magnetic poles.

            ?Principle of carbon brush placement
             a.  Try to get maximum effective conductors. In other words, make the direction of current the same in as many
            conductors under the same pole as possible. In some cases (such as 12-pole rotor), we will sacrifice the number
            of effective conductors to improve commutation. Such cases will not be discussed here.
            b.   Minimize the electric potential of the commutating coil (the one that is shortcut). Typically the sides of that coil
            are placed at the edges of the magnetic poles or between the magnetic poles. So the carbon brushes are
            usually placed in the middle of the commutator bars that are connected to the coil.
            c.  Electric angle between positive and negative brushes is 180°.
            Conclusion: There is not a sole way to connect coil and commutator segments.


            d88Dzͷ